Nowadays, Arlo cameras are being massively adopted due to advanced technology and the ability to capture power. These are available as wired or wireless options and can easily be accessed. However, users occasionally get frustrated while using their surveillance device, such as Arlo Camera Not Recording. This is a common problem that can easily be resolved by following some effective quick fixes.
In addition, this may primarily happen due to inaccurate camera settings and network disconnectivity. Besides this, several other reasons are responsible for the same. So, if you need assistance with the My Arlo camera not recording, then you must walk through this guide. Here, you find the reasons and the troubleshooting methods to resolve it. So, keep reading!
Why Are Arlo Cameras Not Recording?
Moreover, you know that if the Arlo Camera Not Recording or Sending Notifications, then this may be due to network issues and the camera settings. But a few of the other causes are also here that give rise to this error, take a look beneath:
- Unstable/poor network connection
- Subscription plan ends
- Bugs and technical glitches
- Improper camera settings
- Applied Filters in the Library
- Insufficient Power supply
- The camera is zoomed under the settings
- Multiple access to the Arlo admin & don't have permissions
- The camera is out of the router's network range
How to fix the Arlo Camera Not Recording issue?
Furthermore, you now understand the primary reasons Why My Arlo Not Recording, so it is necessary to fix this issue timely to resume the optimum functioning of your surveillance device. Therefore, to assist users, we share the effective troubleshooting methods beneath to fix the not recording error, have a look once:
Place the camera within the router's range
Sometimes Arlo Detects Motion But Does Not Record if it is not positioned within the home network’s range. Hence, make sure that your camera is set within the range of the WI-FI network, whether you are using the base station or the direct router’s wireless network.
Renew the subscription plan
Did Arlo Stop Free Recording? This may happen if your Arlo subscription plan is finished. Therefore, to use the advanced functionalities of the Arlo surveillance device, confirm that the camera is under a workable subscription plan. So, ensure to have the Arlo cloud storage to store the recorded data on your smart device.
Stabilize the network connection
Check that you have joined the home network wirelessly or wired. If you have issues with the wireless internet, then use the ethernet cables to stabilize it. Also, check that you are using the 2.4 GHz network. This will fix the Arlo Won’t Record problem.
Ensure sufficient power supply
Make sure the camera has enough power supply and is completely charged. Similarly, check that the adaptor you are using is original and not broken. Confirm the sufficient voltage and power cables are not faulty.
Check the camera settings
Verify the camera settings, especially Modes and Rules. Make sure that the security device is on Armed Away mode and that Motion and recording are enabled on all cameras. If these are disabled on any of the cameras, then users face One of My Arlo Cameras is Not Recording issues. So, customize the settings accordingly. Also, enable the push notification to receive the alerts and won’t zoom the camera beyond recommendations.
Reboot the camera & the base station
To get rid of the technical glitches and the bugs that cause Arlo essential camera not recording when motion detected issue, power cycle the camera and the base station. To do so, disconnect the power supply to the camera and then the base station if used. Wait for 30 seconds, and reconnect them back to the power supply.
Check the Applied Filters in the Library
Occasionally users apply filters on the surveillance device’s Library. This may give rise to the Arlo Camera Not Recording Locally issue. So, to resolve it, visit the admin interface of the Arlo cam and click on Library>Filter>Device>Select All and follow the further instructions to set or disable the applied filters. This will help to eradicate the non-recording issue.
Factory reset the Arlo camera
If nothing else works to fix the Arlo Stopped Recording problem, then factory reset the camera. For this, you need to unmount the camera first and then hard reset. Keep in mind you have to reconfigure the security device after resetting it. To know the reset procedure, visit us!
Final words
Overall, the information we share here will help you to understand the Arlo Camera Not Recording well. Here, you find the possible causes for the surveillance device not recording or detecting motion. Similarly, effective troubleshooting methods are also highlighted to fix them. Still, seeking more help? Drop us a line!